DIY COWL WINTER DRESS | BURDA 10-2012 #118A

Burda Style 10-2012 #118A

As 2014 was on its last legs, there was still one project on my to do list. It was a lovely woollen winter day dress that would be the perfect addition to my wardrobe. I really wanted to wear it to the NYE party, a dinner with friends, nothing fancy really, so true to myself, I had to rush and finish everything in one day.

Burda Style #118A

The story: I’ve been drooling over this Burda Style pattern ever since I saw it on Pinterest a while ago. But I had a slight prejudice against PDF patterns, so just pinned it on my Dress Patterns Pinterest board and sort of put in the back of my mind. But last year, for various reasons, I warmed up to these type of patterns and when Burda had a promotion in November, it was the first design on my purchase list.

Burda Style 10/2012 #118A

It was a good thing that I loved the dress so much, because it was one of the most difficult PDFs to put together ever! It took me almost two evenings to assemble, add in seam allowance and cut out. Dedication, I’m telling you! Unfortunately, during that time I was working very hard to get the blog launched, so I had to leave the making to one side while I was writing, photo editing and generally working out the mysterious ways of WordPress. But I vowed to make the dress in 2014! So after the blog was all live, I only had NY Eve to do it. So I woke up early in the morning and went for it! By 5PM I had an awesome dress and I wore to the party the very same evening! Tough while watching the fireworks with our friends in SE London, I kept feeling something poking me in the back: it was a pin I had forgotten stuck in the dress!

RELATED  DIY WHITE FLOUNCE SLEEVE BABYDOLL DRESS | FIBRE MOOD ROSALIE

Pattern: Burda Style 10/2012 #118A, size 10
Burda Style 10/2012 118A Line drawing

Fabric: My old favourite, the Gurli throw from IKEA, this time in grey + lightweight stretch faux leather that I have used over and over again for many projects.

Notions: 52cm invisible zipper; strips of fusible interfacing

Talking shop: I wasn’t sure if I had managed to put the PDF pattern together properly, so just to make sure everything would come out as it should, I decided a toile was in order. And good thing I did! This is what it looked like (sorry, the sewing room was a mess, so I had to edit it out!).

toile

Based on the toile, I had to make the following adjustments:

– Removed 5cm from around the front waist. The pattern waist was too low compared to mine.

– The upper back was too wide, I so removed 1.5 cms tapering to nothing at the waist.

– I took in the sleeves by about 3cm tapering to underarm (that included removing 1cm from seam allowance as I sewed them by overlocker)

Burda Style #118A

I made all the changes on the pattern as well and toiled again. I was much happier with the result a second time.

The fabric is very loosely woven, so I wanted to make sure the edges are secure. I ironed strips of fusible interfacing at back neckline and armholes back and front. Then I overlocked absolutely every single raw edge, except the hem, where I used the original hem of the throw.Burda Style #118A

I also use fusible interfacing at centre back, under the invisible zipper. This ensures that there is absolutely no puckering while inserting the zipper. I also have an idiot proof method for invisible zippers, which takes a bit longer, but it never let me down. I baste the entire centre back seam, then baste the zipper to the seam allowances on both sides, then remove the basting along the zipper and sew zipper with invisible zipper foot as normal. As you can see, idiot proof!

RELATED  COLOUR BLOCK BOXY TOP | Burda 08-2017 #112

Burda Style #118A5046

The sleeves were not necessarily a design, more of an improv, as I realised after I started cutting that I did not have enough fabric for sleeves too, so I used some fabric from my inexhaustible stash of lightweight faux leather. And I think it worked really nicely with the wool jersey. Also, I realised the faux leather works very well for set-in sleeves, which I was a bit worried about. But no, it gathers just as well, you just need to make sure you sew the gathering stitches and pin inside the seam allowance, otherwise there will be hole marks.

Burda Style #118A

As I used the original hem, all I had to do was open it a bit at the ends and join then edges together lenghtwise, then roll back and topstitch.

Burda Style #118A

And that was it: started at 10, finished toiling by 1, wearing it by 5 and out of the door to the party by 5.30! I’m very happy with the dress, that I finished it in 2014 and that I have another nice winter dress to wear until the weather gets warmer.

Burda Style #118A

 

Happy sewing!

Follow:

11 Comments

  1. Rashmi
    15 January 2015 / 10:26 AM

    I love this dress Alex! If you put on a formal jacket it can also be worn as an office wear 🙂

    • Alex
      Author
      15 January 2015 / 11:41 AM

      Ha ha, I’m wearing it right now, no jacket (we’re fairly laid back in my team). Feeling very cosy, as our office is quite chilly.

  2. 15 January 2015 / 10:48 PM

    Hey Alex, Great fabric choice and the style suits you down to a T. Well done hun, now I want to make one!!! Nx

    • Alex
      Author
      16 January 2015 / 12:11 PM

      Thanks, Nee! You know it’s just an Ikea blanket, they have it in all colours. Look it up when you go next.

  3. 15 January 2015 / 11:09 PM

    Fabulous dress, great combination of fabrics, looks like a perfect fit for you too.
    Certainly the right style for you.

  4. 15 January 2015 / 11:12 PM

    Fantastic dress Alex, great fabric combination.
    A perfect fit for you in both size and style.
    Paul

    • Alex
      Author
      16 January 2015 / 12:11 PM

      Thank you! What great moniker btw!!

  5. 18 January 2015 / 5:18 AM

    Nice job on this dress! You have a lot of patience and your perseverance paid off.

    • Alex
      Author
      18 January 2015 / 12:09 PM

      Thank you! So pleased with how it came out!

  6. 6 February 2015 / 4:38 PM

    Very impressed, you really had to work for this, it looks great!

    • Alex
      Author
      6 February 2015 / 5:41 PM

      Thank you! Totally labour of love, though. Feels so good to complete things and be able to wear them right away. That’s my biggest motivation usually!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.